Interface Module with Application Processor

    • Interface Module with Application Processor

    Purpose:
    Automotive technology.
    Year of release: 2017
    Guaranteed service life (years): 3
    Estimated production / delivery time (months): 8
    Flight qualification of the product: No
    Possibility to adapt the product to customer requirements: No
    Submit application


    Parameter Value
    W*H*T 120х90х40 mm
    Weight 120 g
    Operating temperature range -40 - +85 C°
    Supply voltage 9…36 V
    Power consumption (typical) <4 W
    Voltage at 8 digital inputs (detection of signal level, signal edge, pulse counting or frequency measurement) with the ability to switch to dry contact monitoring mode, range of received signal levels 5…30 V
    Voltage at 4 analog inputs with four switchable measuring ranges 5…40 V
    4 digital open collector outputs maximum switching voltage 30 V amperage till 150 mA
    USB 2.0 full speed with mode support device OTG
    NP-SM ILTA.468389.001 interface for connection Additional connection of the navigation-connected module (NSM OP ILTA.464444.001) of the accurate navigation module (NM TN ILTA.464444.002)

    Description

    Module purpose: - collection of information from various sensors installed on the vehicle; - transfer of information and commands to external devices; - storage of received information in the “black box” mode; - issue of stored information upon request; -
    ... Module purpose:
    - collection of information from various sensors installed on the vehicle;
    - transfer of information and commands to external devices;
    - storage of received information in the “black box” mode;
    - issue of stored information upon request;
    - read identification information from smart cards.
    Main technical specifications:
    - RS-485 interface with the ability to connect liquid level sensors using the Omnicomm protocol or other devices;
    - RS-232 interface with the ability to connect RFID readers via Omnicomm protocol or other devices;
    - CAN interface for connecting to a vehicle bus using the J1939 protocol;
    - 2 slots for smart cards supporting the ISO 7816.3 protocol;
    - the “black box” memory allows storing information received from all connected devices for 1 month at the frequency of packet formation once every 5 s.
    Read more...

    Legal information
    Please note that this site is for informational purposes only and under no circumstances is not a public offer determined by the provisions of the Part 2 Article 437 of the Civil code of the Russian Federation. Information on this site may be changed or supplemented.